Roll-to-roll CCD alignment precision printing machine

Roll-to-roll CCD alignment precision printing machine

Host characteristics

For PET, PVC, PC, transfer paper (film), flower paper, nameplate, PCB/FPC, mobile phone buttons, 3M glue, membrane switch, solar battery, trademark laser, scratch card, LED light bar, not dry Screen printing of adhesive labels, stainless steel, aluminum foil, copper foil, etc., as well as processing in industries such as IMD/IML in-mold decorative plastics.

1. Adopting the industrial camera CCD camera positioning function, the platform XYθ can automatically capture and locate, and the printing precision is 0.03 ~ 0.05mm.

2. The printing feed adopts the tension correction method to ensure smooth material.

3, using Mitsubishi servo printing pull material to ensure the quality of equipment.

4, printing speed of 600 ~ 800 impressions per hour (depending on the size of the product).

Second feeder characteristics

1. Automatically discharge waste and automatically tear off the protective film device;

2, coil material installation, adjustable tension air expansion shaft;

3, feeding shaft, variable frequency motor drive, the initial speed of discharge can be adjusted at will, the starting frequency slowly rises from 0 to run, avoiding too fast start, causing surface scratches on the material;

4, static bar, equipped with static elimination function;

Three light box characteristics

1. Taiwan Yangming photoelectric switch control;

2. The pre-press material enters the bin and then enters the printing press;

3. The post-press material enters the bin and then enters the oven;

Four printing host features

Five dryer characteristics

1. Feed the suction plate to control the tension;

2, multi-zone heating, circulating hot air drying, automatic constant temperature, each zone can be freely set temperature, under the same temperature control, the temperature of each zone is the same;

3, the inverter automatically receives the material, the oven is 45 meters / 60 meters dry;

4. Silicone sleeve roller shaft can make the material have no metal contact during baking, avoiding deformation of printed matter under special shutdown conditions and ensuring printing quality;

5, static bar, equipped with static elimination function;

Six technical parameters