Contact: Mr. Yang, 13925789871
Mr. Hu, 13509020493
Tel: 0769-82600378
Mailbox: imdiml@163.com
Company website: www.dglichao.cn
Address: No. 4, Hongye Middle Road, Yongtou, Chang'an Town, Dongguan, Guangdong, China
website:en.dglichao.cn
Contact: Mr. Yang, 13925789871
Mr. Hu, 13509020493
Tel: 0769-82600378
Mailbox: imdiml@163.com
Company website: www.dglichao.cn
Address: No. 4, Hongye Middle Road, Yongtou, Chang'an Town, Dongguan, Guangdong, China
website:en.dglichao.cn
4060 punching machine round cylinder
3D punching machine:
This equipment is mainly used for die cutting of IMD/IML films such as plastic PET/PC/PVC.
◆The whole structure of the equipment is four-column closed type, with thoughtful design, emergency operation with two-hand operation, and high-sensitivity on-beam grating safety protection system to ensure operator safety;
◆The oil cylinder adopts adjustable type, the positioning accuracy of the bottom dead center is high, and the repeating precision can reach 0.01MM;
◆ Medium plate quenching plating treatment, never deformation, high precision;
◆PLC control system is far longer than relay interlock control, and the failure rate is low;
◆The equipment is automatically operated to enter the sleep state without any operation, saving energy and environmental protection;
◆ Pressure, stroke, speed and closing height can be adjusted according to requirements, which is convenient for operation.
2.2, technical parameters
Serial number | name | LC-CQ-4060 parameters |
1 | Machine size mm (length × width × height) | 1100×780×1850 |
2 | Machine weight (kg) | 600 |
3 | Total power (KW) | 1 |
4 | Power supply (V) | 380 |
5 | Working pressure (kg/mm2) | no |
6 | Master cylinder output power | 4.5T |
7 | Master cylinder stroke (mm) | 250 |
8 | Master cylinder travel time (S) | 1-1.2 |
9 | Workbench area mm2 (front and rear × left and right) | 400×446 |
10 | The largest mold area mm2 (front and rear × left and right) | 400×446 |
11 | Minimum mold area mm2 (front and rear × left and right) | 150×150 |
12 | Upper and lower template maximum height (mm) | 360 |
13 | Upper and lower template minimum height (mm) | 90 |
14 | Mode locking | Well T-slot |
15 | T-shaped clamping screw | M14 |
16 | Can production be counted? | can |