Punching machine

category：Hydraulic punching machine
clicks：
pubdate：2018/11/30
inquiry

details

80100 Punching machine

3D punching machine:

This equipment is mainly used for die cutting of IMD/IML films such as plastic PET/PC/PVC.

◆The whole structure of the equipment is four-column closed type, with thoughtful design, emergency operation with two-hand operation, and high-sensitivity on-beam grating safety protection system to ensure operator safety;

◆The oil cylinder adopts adjustable type, the positioning accuracy of the bottom dead center is high, and the repeating precision can reach 0.01MM;

◆ Medium plate quenching plating treatment, never deformation, high precision;

◆PLC control system is far longer than relay interlock control, and the failure rate is low;

◆The equipment is automatically operated to enter the sleep state without any operation, saving energy and environmental protection;

◆ Pressure, stroke, speed and closing height can be adjusted according to requirements, which is convenient for operation.

2.2, technical parameters

Serial number	name	LC-CQ-4060 parameters
1	Machine size mm (length × width × height)	1100×780×1850
2	Machine weight (kg)	600
3	Total power (KW)	1
4	Power supply (V)	380
5	Working pressure (kg/mm2)	no
6	Master cylinder output power	4.5T
7	Master cylinder stroke (mm)	250
8	Master cylinder travel time (S)	1-1.2
9	Workbench area mm2 (front and rear × left and right)	400×446
10	The largest mold area mm2 (front and rear × left and right)	400×446
11	Minimum mold area mm2 (front and rear × left and right)	150×150
12	Upper and lower template maximum height (mm)	360
13	Upper and lower template minimum height (mm)	90
14	Mode locking	Well T-slot
15	T-shaped clamping screw	M14
16	Can production be counted?	can